Samsung Remote Temperature Sensor for Samsung ASHP Range

Samsung SKU: SAM-MRW-TA

More Details

The Samsung Remote Temperature Sensor for Samsung ASHP Range enhances your air source heat pump's efficiency by providing accurate temperature readings. Easy to integrate, it ensures reliable performance in various conditions, promoting energy savings and extending system lifespan. A vital tool for installers aiming for optimal customer satisfaction.

Documents

Samsung Remote Temperature Sensor for Samsung ASHP Range

Samsung MRW-TA external room sensor for indoor temperature sensing on the connected indoor unit. Used where a remote room temperature reading is required, with wall-mounted installation and supplied 12m extension wire.

Key Features
External room sensor

Measures indoor temperature away from the indoor unit for remote sensing applications.

12m extension wire supplied

Provides flexible sensor placement during installation.

Wall-mounted installation

Can be fitted to a wall or switch box using the supplied fixing parts.

Indoor or surface cable routing

Installation procedure covers both concealed and surface cable routing.

PCB K1 switch OFF required

Manual instructs turning off the indoor unit PCB K1 switch when the sensor is installed.

Benefits
  • Allows temperature measurement at a representative room location
  • Helps reduce influence from direct sunlight, heaters and direct air discharge when installed as instructed
  • Supports flexible cable routing during installation
  • Supplied extension wire and fixing accessories simplify on-site fitting
Technical Summary

Model MRW-TA external room sensor for connection to the indoor unit. Recommended installation height is 1.1m from the floor. Supplied with 12m extension wire, 2 mounting screws (M4x16), 2 cable ties, 2 adapters and 2 wire joints.

Installation Notes

Installation should be carried out by an authorised installer or specialist. Isolate the main power before fitting. Avoid locations exposed to direct sunlight, heating appliances, direct cool or warm air, flammable gas, machine oil, sulphide gas, acids, alkalis or spray. Do not allow water ingress. Do not pull the extension cable with tensile force, and do not connect wires directly without a connector. If the external room sensor is installed, set the indoor unit PCB K1 switch to OFF. Some models require a software upgrade.

Efficiency

No efficiency data stated. Sensor placement guidance is intended to support accurate indoor temperature measurement.

Manufacturer

Samsung

Commodity Code

9025190090

Dimensions (mm) (H x W x D)

236 x 162 x 58

Weight (kg)

0.03

PDF Icon

Mrw Ta Installation Manual

Write Your Own Review
You're reviewing: Samsung Remote Temperature Sensor for Samsung ASHP Range
loader
Loading...

check-circle You submitted your review for moderation.